Animalintex Hoof Shape 3/Pk

Animalintex Hoof Shape -A wound dressing and traction plaster cut in hoof shape for use on the hooves.

Why Animalintex?
Animalintex is used worldwide as a wound dressing and traction plaster. Its application possibilities as a moist warm, moist cold and dry dressing make it unique due to the following components:

-boric acidas a mild antiseptic
-tragacanthas a hydroscopic component
-Cottonabsorbs, protects and warms
- Onecushioning layerof cotton wool prevents additional injuries
- Thefilmon the back protects against contamination from outside and locks in moisture and heat.

Why Animalintex Hoof Shape?
Animalintex Hoof Shape has been developed to facilitate the preparation and application of the bandage without sacrificing the high effectiveness of Animalintex. Animalintex Hoof Shape is:

- Easier to prepare, no cutting required
- Pre-cut in hoof shape, you have no waste
- The dressing is easier to apply, especially when used wet
- The hoof shape makes it easier for Animalintex to stay in place and thus makes bandaging easier

General preparations:

1. Carefully clean the application area of ​​dirt
2. Place the pad in a clean, flat container so that the waterproof plastic film is facing upwards

Warm, moist compress:

1. Pour boiled water cooled to 38°C into the container around the pad.
2. After the pad has absorbed enough water, remove it from the container and carefully squeeze out any excess water.
3. Place the dressing on the affected area so that the waterproof plastic film faces outwards (away from the skin). Press the dressing around the wound area.
4. Fix the dressing with a bandage, e.g. a cohesive bandage or an elastic adhesive bandage, so that it is completely covered.

Cold and wet compress:

1. The general preparations are the same as for warm moist compresses, except that in this case you should use boiled water that has completely cooled down. Pour the water into the container around the compress.
2. After the pad has absorbed enough water, gently squeeze it to remove excess water.
3. When the pad is cold, place it on the affected area so that the waterproof plastic film faces outwards (away from the skin).
4. Fix with a bandage so that the pad is completely covered.

Dry wound dressing:

1. Carefully clean the application area of ​​dirt
2. Place the pad on the affected area so that the waterproof plastic film faces outwards (away from the skin).
3. Fix with a bandage so that the pack is completely covered.

Precautions:
Change Animalintex dressings at least every 12 hours.